This tool does not use batteries because it is powered by the vehicles accessory fuses. 

Yes, the tools are still able to establish a successful connection with a vehicle that cannot crank up and start. If your vehicle has no power however, our tool will not be able to establish a connection to the vehicle since our tools require power from the vehicle to successfully connect.

The I/M MONITOR STATUS icons represent systems that are being tested by your vehicle for any possible faults. Monitors are special computer programs used by the vehicle’s computer to verify proper operation of specific emissions-related components or systems. Any flashing monitor indicates that testing is not completed for that specific monitor.

The tool is powered by the vehicle’s accessory fuses. If the tool does not power on when you connect it to a vehicle, most likely, there is an accessory fuse blown. Replace that blown fuse to get the tool to successfully power on and connect.

No, unfortunately, the recorded live data can only be viewed, graphed, and played back on the device itself. 

The manual and software can be found in the same location, by clicking on the "Support" tab at the top of the page. Select "OBD2 Diagnostic Tools" for your product category, then select your model from the list. Click "Search" to view the software and/or manual for that specific device. 

We always recommend connecting the tool to your vehicle first, before turning on the ignition or starting the vehicle. So long as this procedure is followed, you can use the code reader on the vehicle while it is running.

 

IMPORTANT: If it is necessary to drive the vehicle while observing the data on the code readers display, ALWAYS have a second person to help you. One person should drive, while the second person observes the data on the tool. 

Definitions for all available DTCs (both Generic and Manufacturer-specific) can be accessed through the Innova website (www.innova.com). Go to the "Support" tab, choose DTC Library, and follow the on-screen instructions. Please enter P0 (zero), not Po when entering the codes.

All of our Innova diagnostic tools will work on heavy duty vehicles as long as they are OBD2 compliant. You can check whether the vehicle is OBD2 compliant by checking the emissions label on the roof of the hood or near the radiator. 

No. Innova’s code readers/scan tools are designed to retrieve information that is stored in your vehicle’s computer. With the exception of initiating the EVAP system Leak Test, O2 Test, and Non-Continuous Test (for vehicles that support these tests), the tools do not command, control, or otherwise, enter information to your vehicle. It is not possible for these tools to damage your vehicle’s electronic system.