OBD2 6100p Diagnostic Tool #6100p

The all-new 6100p is the perfect entry-level tool designed to empower any consumer or technician when it comes to vehicle maintenance and repair. This code reader works on all 1996 and newer OBD2 cars, light trucks, SUV's, hybrids, and minivans.


WARNING
WARNING

This product can expose you to chemicals including DiNP, which is known to the State of California to cause cancer.
For more information go to www.P65Warnings.ca.gov

KEY FEATURES

Check Engine:

Quickly reveal the cause of "Check Engine" light warnings on any 1996 and newer OBD2 car, light truck, SUV and even Hybrids!

ABS & SRS:

Read and erase ABS & SRS light trouble codes on most OBD2 vehicles.

Battery & Alternator Tests:

Battery & Alternator tests check the performance of a vehicle's charging system.

Oil Reset:

Oil Reset feature provides step-by-step reset procedures for most 1996 and newer OBD2 vehicles.

Freeze Frame:

Freeze Frame shows engine conditions such as fuel trim, engine coolant temp, etc., at the time the Malfunction Indicator Lamp turned on.

Need more help?
SUPPORT
COVERAGE CHECKER
Use the coverage checker to identify which obd2 tool functions will work on your vehicle.
Enter Vehicle Information
OR
Enter VIN
17

CHECK COVERAGE

ACCESSORIES
Innova Soft Pouch

#88-0029

$19.99
ADD TO CART
DLC OBD2 Cable

#13-1009

$34.99
ADD TO CART
USB Mini Cable

#13-0024

$9.99
ADD TO CART

FAQs
Can I use the tool with the engine running?

We always recommend connecting the tool to your vehicle first, before turning on the ignition or starting the vehicle. So long as this procedure is followed, you can use the code reader on the vehicle while it is running.

 

IMPORTANT: If it is necessary to drive the vehicle while observing the data on the code readers display, ALWAYS have a second person to help you. One person should drive, while the second person observes the data on the tool. 

Unfortunately, if the vehicle's engine is not in running condition, the tool will not be able to link to its ECU.

Definitions for all available DTCs (both Generic and Manufacturer-specific) can be accessed through the Innova website (www.innova.com). Go to the "Support" tab, choose DTC Library, and follow the on-screen instructions. Please enter P0 (zero), not Po when entering the codes.

The manual and software can be found in the same location, by clicking on the "Support" tab at the top of the page. Select "OBD2 Diagnostic Tools" for your product category, then select your model from the list. Click "Search" to view the software and/or manual for that specific device. 

This tool requires AA batteries (3) in order to have vehicle information stored and for powering on when not connected to a vehicle.
The I/M MONITOR STATUS icons represent systems that are being tested by your vehicle for any possible faults. Monitors are special computer programs used by the vehicle’s computer to verify proper operation of specific emissions-related components or systems. Any flashing monitor indicates that testing is not completed for that specific monitor.
The tool is powered by the vehicle’s accessory fuses. If the tool does not power on when you connect it to a vehicle, most likely, there is an accessory fuse blown. Replace that blown fuse to get the tool to successfully power on and connect.
No. Innova’s code readers/scan tools are designed to retrieve information that is stored in your vehicle’s computer. With the exception of initiating the EVAP system Leak Test, O2 Test, and Non-Continuous Test (for vehicles that support these tests), the tools do not command, control, or otherwise, enter information to your vehicle. It is not possible for these tools to damage your vehicle’s electronic system.

No, this tool does not have any live data capabilities. 

All of our Innova diagnostic tools will work on heavy duty vehicles as long as they are OBD2 compliant. You can check whether the vehicle is OBD2 compliant by checking the emissions label on the roof of the hood or near the radiator.