Back To Blog Academy

How To Reset the Maintenance Light on Your 2012 Toyota Camry

By Joseph Kim
Published on April 8th, 2024

As an Amazon associate, we earn from qualifying purchases.

Sometimes, your mechanic may forget to reset your Toyota Camry’s maintenance light after performing an oil change or other routine services. Or if you changed your own engine oil, you’ll need to manually turn off the maintenance light on your vehicle’s dashboard.

We got you covered! Here’s our super easy guide on how to turn off the oil maintenance light on your 2012 Toyota Camry. We provide you two methods:

  • The Manual Way
  • Using an OBD2 Scanner

Method 1

The Manual Way

1

Turn your ignition to the ON position (2 clicks)

Reset the Maintenance Light on Toyota Camry

2

Push the "stick-like" button on the right corner of your dashboard once. This will change your odometer display to “Trip A”

Reset the Maintenance Light on Toyota Camry

3

Turn your ignition off

Reset the Maintenance Light on Toyota Camry

4

Turn your ignition back on (2 clicks) while holding the "stick-like" button on the right corner of your dashboard. You should do both at the same time. Hold it till you see the miles reset to zero.

Reset the Maintenance Light on Toyota Camry

And that’s it! You should see your “Trip A” miles reset to 0, which means you’ve successfully reset your maintenance light.

Find the perfect scanner in 1 minute

Method 2

Using an OBD2 Scanner

1

Plug-in your OBD2 scanner to the DLC port. Keep your ignition on.

Reset the Maintenance Light on Toyota Camry using obd2 scanner

2

Press “Menu” and navigate to “Service Resets”

Reset the Maintenance Light on Toyota Camry using obd2 scanner

3

Select “Oil Reset”

Reset the Maintenance Light on Toyota Camry using obd2 scanner

4

Follow in-device instructions

Reset the Maintenance Light on Toyota Camry using obd2 scanner

Quite simple, right?

For this 2012 Toyota Camry, our scanners do not support oil reset within the app itself. It'll only tell you verified instructions on how to reset it manually.

However, our scanners are also capable of reseting your maintenance light directly from the scanner, depending on the type of vehicle you have. For example, our scanner is able to reset the maintenance light of a 2018 Audi Q3 with just a few button clicks.

Have Questions?

Hop in the discussion board on our community site!
It's a place where we help each other answer questions. Like Reddit but for automotive lovers.

Visit Community