2012 Ford Fusion L4 2.5L_How to Use the Keyless Entry Keypad

As an Amazon associate, we earn from qualifying purchases.

The "Keyless Entry Keypad" feature on the 2012 Ford Fusion L4 2.5L offers both convenience and security, making everyday use of your vehicle more seamless. This system lets you lock and unlock your car without needing a physical key, simply by entering a personalized code on the keypad located on the driver’s door. Ideal for busy individuals, it eliminates the need to fumble for keys and provides peace of mind when you need quick, secure access to your vehicle. Additionally, the Keyless Entry Keypad is especially useful in situations where you need to grant someone else access to your car without handing over a key. This article provides a step-by-step guide to set up and use this feature effectively.

How to Set/Use the Keyless Entry Keypad

Feature Overview

The keyless entry keypad helps you:

• Lock or unlock the doors without using a key.
• Access the trunk effortlessly.

The keypad functions using the factory-set five-digit entry code, which can be found on the owner’s wallet card stored in the glove box or obtained from an authorized dealer. Additionally, up to three personalized five-digit entry codes can be programmed for convenience.

Note: When using the keypad, ensure you press the center of each button firmly for proper activation.

Setting Up a Personal Entry Code

1. Input the factory-set code on the keypad.

2. Press the "1 • 2" button within five seconds.

3. Enter your desired 5-digit code, ensuring each digit is entered within five seconds of the previous one.

4. The system confirms the programming by locking and then unlocking the doors.

Note:

• Avoid setting a code that consists of five identical numbers for security reasons.
• To enhance protection, do not use five numbers in sequential order.
• The factory-set code always remains functional, even if you create your own personal code(s).

Erasing Personal Codes

1. Input the factory-set 5-digit code on the keypad.

2. Within five seconds, press and release the "1 • 2" button.

3. Press and hold the "1 • 2" button for two seconds. Ensure this step is completed within five seconds of Step 2.

All personal codes are now erased, and only the factory-set 5-digit code remains functional.

Anti-Scan Feature

If an incorrect code is entered seven times (total 35 consecutive button presses), the keypad activates anti-scan mode. In this mode, the keypad becomes disabled for one minute, and the keypad lamp flashes to indicate the lockout.

The anti-scan feature deactivates after:

• One minute of inactivity on the keypad.
• Pressing the “Unlock” control button on the remote entry transmitter section of your integrated keyhead transmitter.
• Turning the ignition on.

Unlocking and Locking the Doors Using the Keyless Entry Keypad

• To unlock the driver’s door, input the factory-set or your personal 5-digit code, making sure each digit is pressed within five seconds of the previous digt. The interior lights will turn on.
• To unlock all doors, enter the factory-set or your code and then press the 3 • 4 button within five seconds.
• To open the trunk, enter the factory-set or your code and press the 5 • 6 button within five seconds.
• To lock all doors, simultaneously press and hold the 7 • 8 and 9 • 0 buttons (with the driver's door closed). There is no need to enter the keypad code in advance.

Back To Blog Academy