As an Amazon associate, we earn from qualifying purchases.

In modern vehicles, the remote vehicle start feature has become a standard convenience. The remote vehicle start system in your 2015 Chevrolet Equinox enhances both comfort and functionality by allowing the engine to be started remotely. This feature is particularly beneficial in extreme weather conditions, as it allows you to pre-condition the cabin for comfort before entering the vehicle. With the press of a button on the key fob, the vehicle can be started from a distance, saving time and improving the overall driving experience. Additionally, the system integrates seamlessly with the vehicle’s safety features, ensuring secure operation. This article provides a comprehensive guide on how to use the remote vehicle start system effectively in your 2015 Chevrolet Equinox L4 2.4L.

System Guidelines

Remote Vehicle Start System Overview

The remote vehicle start system allows the engine to be started from outside the vehicle for added convenience. During remote start, the climate control system retains its previous settings. Features such as the rear defogger and heated seats may activate automatically under cold conditions; however, the rear defog indicator light will not illuminate during this process.

WARNING: Some local laws may restrict or regulate the use of remote starters, such as requiring the vehicle to remain in view while in operation. Always check and adhere to local regulations before using this feature.

Start the Vechicle Using Remote Start

To start the engine using remote start:

1. Lock the Vehicle: Press and release the Lock button on the Remote Keyless Entry (RKE) transmitter.

2. Activate Remote Start: Immediately press and hold the Remote Start button for at least four seconds, or until the turn signal lamps flash. The flashing lamps confirm the remote start request has been received.

• The parking lamps illuminate and stay on while the engine is running.
• The vehicle’s doors remain locked.

3. Before Driving: Insert the key and turn it to the ON/RUN position. The engine will shut off after 10 minutes unless extended or the key is turned to ON/RUN.

Extending Engine Run Time

To extend the engine run time for an additional 10 minutes:

1. Wait at least 30 seconds after the first remote start.

2. Repeat the steps to start the engine (press Lock, then press and hold Remote Start).

• The second 10-minute run time begins immediately after the extension request.
• A maximum of two remote starts or extensions are allowed between ignition cycles.
• To reset the system, the ignition must be cycled to ON/RUN and then back to LOCK/OFF using the key.

Shut the Engine Off After a Remote Start

To turn off the engine during a remote start:

• Press and hold the Remote Start button until the parking lamps turn off.
• Activate the hazard warning flashers.
• Insert the key and turn it to the ON/RUN position, then back to LOCK/OFF.

Conditions That Prevent Remote Start

The remote start feature will not operate under the following conditions:

• The key is in the ignition.
• Any door or the hood is open.
• The hazard warning flashers are activated.
• There is an emission control system malfunction.
• The engine coolant temperature is too high.
• The oil pressure is too low.
• Two remote starts have already been used without an ignition cycle.
• The vehicle is not in P (Park).

Remote Start Ready

If the vehicle is not equipped with the remote vehicle start feature, it may have a remote start ready system. This feature allows a dealer to install the manufacturer’s remote start system. Contact your dealer to inquire about adding this feature to your vehicle.